1. Install the powder scraper and the powder dosing disc #
1.1 Place the powder scraper (small gear) on the pipe at the bottom of the milk powder container.
1.2 Place the turning disc with the large gear at the bottom of the milk powder container and insert the pin through the hole.
1.3 Install the powder dosing disc on the inside of the milk powder container on the pin.
2. Install the milk powder container and the remaining turning discs #
2.1 Place the milk powder container in line with the rails on the base unit.
2.2 The powder dosing disc was installed in the previous step.
2.3 Install the rotor. Ensure that the red arrow on the rotor points to the red arrow on the milk powder container and the front and back of the rotor fall into the notches on the inside of the milk powder container.
2.4 Install the powder turning disc.
3. Install the milk powder container lid #
3.1 Pay attention to the buckle of the lid and tray, turn clockwise.
4. Install the watertank #
4.1 Insert the boiler lid and press firmly.
4.2 Place the bottom of the watertank securely on the boiler cover. Then click the watertank into the slot on the base unit for extra stability.
5. Install the mixing funnel #
5.1 First, join the bottom piece and the top piece of the mixing funnel together. Then place the two holes in the mixing funnel on the two protruding pins under the display on the base unit.
5.2 Slide the mixing funnel backwards until you feel a ‘click’. Now the mixing funnel is firmly in place.
6.Install the water collection tray and the adjustable bottle tray #
7. Installation complete #
7.1. Your Easybaby Milk Maker can now be used.