Breast shell construction #
Follow the steps below to properly assemble the Breast Pump. It is essential to follow the steps below carefully for the optimal operation of the Breast Pump.
PLEASE NOTE
1. Be sure to clean and disinfect the Breast Pump as indicated in these instructions for use.
2. Be sure to assemble the Breast Pump correctly as indicated in these instructions for use.
3. Before assembling the Breast Pump, remove dirt around the rim to prevent leakage. Place the assembled connector into the milk collection cup. Using both hands, press on the disc portion to firmly secure the edges and ensure a complete seal.
- 1. Place the silicone membrane into the connector, pressing it with your hands to firmly secure the edges to achieve a complete seal.
- Install the valve in the bottom of the connector. Make sure it is placed in the correct orientation. There is an arrow on the valve and on the connector. Make sure the arrows are placed together. Press the valve firmly onto the connector.
3. Place the connector into the milk collection cup, with the “ear” of the connector aligned with the internal slot of the milk collection cup, and press down on the disc portion with both hands to firmly secure the edges for a complete seal.
4. Place the funnel onto the milk collection cup. Align the slot on the funnel with the slot on the milk collection cup and press the edges with both hands to make sure it seals properly. You can now place the motor on the breast shell.
TIP
Sometimes the silicone parts are easier to assemble when wet.
PLEASE NOTE
The Breast Pump does not work when charged.